From 98d6e837fcb63d363a3c58bb64dd4078b054b4d2 Mon Sep 17 00:00:00 2001 From: Daniel Warner Date: Mon, 1 Apr 2013 11:05:01 +0100 Subject: [PATCH] Update build system --- .hgignore | 10 +- INSTALL | 370 ++++++++++++++++++ aclocal.m4 | 1028 ++++++++++++++++++++++++++++++++++++++++++++++++++ configure | 207 +++++----- configure.ac | 4 +- depcomp | 708 ++++++++++++++++++++++++++++++++++ install-sh | 527 ++++++++++++++++++++++++++ missing | 331 ++++++++++++++++ 8 files changed, 3077 insertions(+), 108 deletions(-) create mode 100644 INSTALL create mode 100644 aclocal.m4 create mode 100755 depcomp create mode 100755 install-sh create mode 100755 missing diff --git a/.hgignore b/.hgignore index d593feb..6fe80f9 100644 --- a/.hgignore +++ b/.hgignore @@ -1,9 +1,9 @@ # Exact paths to config junk -^INSTALL$ -^aclocal.m4$ -^(stamp-h1|depcomp|install-sh|ltmain.sh|missing)$ -^config.(h|log|status|guess|sub)$ -^autom4te.cache$ +#^INSTALL$ +#^aclocal.m4$ +#^(stamp-h1|depcomp|install-sh|ltmain.sh|missing)$ +#^config.(h|log|status|guess|sub)$ +#^autom4te.cache$ # Build artifacts ^libsgp4/libsgp4.a$ diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..a1e89e1 --- /dev/null +++ b/INSTALL @@ -0,0 +1,370 @@ +Installation Instructions +************************* + +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. + + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. + +Basic Installation +================== + + Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. Caching is +disabled by default to prevent problems with accidental use of stale +cache files. + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. + + The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. + + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package, generally using the just-built uninstalled binaries. + + 4. Type `make install' to install the programs and any data files and + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. + + 6. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you can use GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. + + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. + + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. + +Installation Names +================== + + By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + +Specifying the System Type +========================== + + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS + KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). + +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: + + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash + +`configure' Invocation +====================== + + `configure' recognizes the following options to control how it +operates. + +`--help' +`-h' + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 0000000..c47f57e --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,1028 @@ +# generated automatically by aclocal 1.11.6 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, +# Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically `autoreconf'.])]) + +# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software +# Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.11' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.11.6], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.11.6])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 9 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009, +# 2010, 2011 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 12 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], UPC, [depcc="$UPC" am_compiler_list=], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 5 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 16 + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.62])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl +]) +_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl +dnl The `parallel-tests' driver may need to know about EXEEXT, so add the +dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro +dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl +]) + +dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation, +# Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST(install_sh)]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 6 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation, +# Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_PROG_MKDIR_P +# --------------- +# Check for `mkdir -p'. +AC_DEFUN([AM_PROG_MKDIR_P], +[AC_PREREQ([2.60])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +dnl while keeping a definition of mkdir_p for backward compatibility. +dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +dnl Makefile.ins that do not define MKDIR_P, so we do our own +dnl adjustment using top_builddir (which is defined more often than +dnl MKDIR_P). +AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +case $mkdir_p in + [[\\/$]]* | ?:[[\\/]]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software +# Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# -------------------- +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ------------------------ +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; +esac + +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# Copyright (C) 2009, 2011 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# (`yes' being less verbose, `no' or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], +[ --enable-silent-rules less verbose build output (undo: `make V=1') + --disable-silent-rules verbose build output (undo: `make V=0')]) +case $enable_silent_rules in +yes) AM_DEFAULT_VERBOSITY=0;; +no) AM_DEFAULT_VERBOSITY=1;; +*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few `make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using `$V' instead of `$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004, 2005, 2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + diff --git a/configure b/configure index 5677a28..efc3c3c 100755 --- a/configure +++ b/configure @@ -1,13 +1,11 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.68 for sgp4 1.0. +# Generated by GNU Autoconf 2.69 for sgp4 1.0. # # Report bugs to . # # -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software -# Foundation, Inc. +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. # # # This configure script is free software; the Free Software Foundation @@ -136,6 +134,31 @@ export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh @@ -169,7 +192,8 @@ if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi -test x\$exitcode = x0 || exit 1" +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && @@ -213,21 +237,25 @@ IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : - # We cannot yet assume a decent shell, so we have to provide a - # neutralization value for shells without unset; and this also - # works around shells that cannot unset nonexistent variables. - # Preserve -v and -x to the replacement shell. - BASH_ENV=/dev/null - ENV=/dev/null - (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV - export CONFIG_SHELL - case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; - esac - exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 fi if test x$as_have_required = xno; then : @@ -330,6 +358,14 @@ $as_echo X"$as_dir" | } # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take @@ -451,6 +487,10 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). @@ -485,16 +525,16 @@ if (echo >conf$$.file) 2>/dev/null; then # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. + # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' + as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null @@ -506,28 +546,8 @@ else as_mkdir_p=false fi -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x +as_test_x='test -x' +as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -1132,8 +1152,6 @@ target=$target_alias if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used" >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi @@ -1378,9 +1396,9 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF sgp4 configure 1.0 -generated by GNU Autoconf 2.68 +generated by GNU Autoconf 2.69 -Copyright (C) 2010 Free Software Foundation, Inc. +Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF @@ -1494,7 +1512,7 @@ $as_echo "$ac_try_echo"; } >&5 test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext + test -x conftest$ac_exeext }; then : ac_retval=0 else @@ -1517,7 +1535,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by sgp4 $as_me 1.0, which was -generated by GNU Autoconf 2.68. Invocation command line was +generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ @@ -1932,7 +1950,7 @@ case $as_dir/ in #(( # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. @@ -2101,7 +2119,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -2141,7 +2159,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -2192,7 +2210,7 @@ do test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do - { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ @@ -2245,7 +2263,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -2433,7 +2451,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -2473,7 +2491,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -2536,7 +2554,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -2580,7 +2598,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CXX="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3216,9 +3234,9 @@ fi if test x$enable_debug = xyes; then - AM_CXXFLAGS="-g -O0 -Werror -Wextra -W -Wall -ansi -pedantic -Wpointer-arith -Wwrite-strings -Wno-long-long -Wconversion" + AM_CXXFLAGS="-g -O0 -Werror -Wextra -W -Wall -Wconversion" else - AM_CXXFLAGS="-DNDEBUG -O2 -fomit-frame-pointer -Wextra -Werror -W -Wall -ansi -pedantic -Wpointer-arith -Wwrite-strings -Wno-long-long -Wconversion" + AM_CXXFLAGS="-DNDEBUG -O2 -fomit-frame-pointer -Wextra -Werror -W -Wall -Wconversion" fi ac_ext=c @@ -3243,7 +3261,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3283,7 +3301,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3336,7 +3354,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3377,7 +3395,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue @@ -3435,7 +3453,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3479,7 +3497,7 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 @@ -3675,8 +3693,7 @@ cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include -#include -#include +struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); @@ -4417,16 +4434,16 @@ if (echo >conf$$.file) 2>/dev/null; then # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. + # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' + as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null @@ -4486,28 +4503,16 @@ else as_mkdir_p=false fi -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -4529,7 +4534,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # values after options handling. ac_log=" This file was extended by sgp4 $as_me 1.0, which was -generated by GNU Autoconf 2.68. Invocation command line was +generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -4586,10 +4591,10 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ sgp4 config.status 1.0 -configured by $0, generated by GNU Autoconf 2.68, +configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" -Copyright (C) 2010 Free Software Foundation, Inc. +Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." @@ -4669,7 +4674,7 @@ fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' diff --git a/configure.ac b/configure.ac index e81f864..4130a4f 100644 --- a/configure.ac +++ b/configure.ac @@ -19,9 +19,9 @@ AC_ARG_ENABLE(debug, enable_debug=no) if test x$enable_debug = xyes; then - AM_CXXFLAGS="-g -O0 -Werror -Wextra -W -Wall -ansi -pedantic -Wpointer-arith -Wwrite-strings -Wno-long-long -Wconversion" + AM_CXXFLAGS="-g -O0 -Werror -Wextra -W -Wall -Wconversion" else - AM_CXXFLAGS="-DNDEBUG -O2 -fomit-frame-pointer -Wextra -Werror -W -Wall -ansi -pedantic -Wpointer-arith -Wwrite-strings -Wno-long-long -Wconversion" + AM_CXXFLAGS="-DNDEBUG -O2 -fomit-frame-pointer -Wextra -Werror -W -Wall -Wconversion" fi AC_SEARCH_LIBS([clock_gettime], diff --git a/depcomp b/depcomp new file mode 100755 index 0000000..25a39e6 --- /dev/null +++ b/depcomp @@ -0,0 +1,708 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2012-03-27.16; # UTC + +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010, +# 2011, 2012 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by 'PROGRAMS ARGS'. + object Object file output by 'PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputting dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +# A tabulation character. +tab=' ' +# A newline character. +nl=' +' + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvisualcpp +fi + +if test "$depmode" = msvc7msys; then + # This is just like msvc7 but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvc7 +fi + +if test "$depmode" = xlc; then + # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations. + gccflag=-qmakedep=gcc,-MF + depmode=gcc +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the "deleted header file" problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' "$nl" < "$tmpdepfile" | +## Some versions of gcc put a space before the ':'. On the theory +## that the space means something, we add a space to the output as +## well. hp depmode also adds that space, but also prefixes the VPATH +## to the object. Take care to not repeat it in the output. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like '#:fec' to the end of the + # dependency line. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr "$nl" ' ' >> "$depfile" + echo >> "$depfile" + + # The second pass generates a dummy entry for each header file. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +xlc) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts '$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u + "$@" -Wc,-M + else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u + "$@" -M + fi + stat=$? + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + # Each line is of the form 'foo.o: dependent.h'. + # Do two passes, one to just change these to + # '$object: dependent.h' and one to simply 'dependent.h:'. + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'. + # However on + # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using '\': + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + # tcc 0.9.26 (FIXME still under development at the moment of writing) + # will emit a similar output, but also prepend the continuation lines + # with horizontal tabulation characters. + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form 'foo.o: dependent.h', + # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'. + # Do two passes, one to just change these to + # '$object: dependent.h' and one to simply 'dependent.h:'. + sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \ + < "$tmpdepfile" > "$depfile" + sed ' + s/[ '"$tab"'][ '"$tab"']*/ /g + s/^ *// + s/ *\\*$// + s/^[^:]*: *// + /^$/d + /:$/d + s/$/ :/ + ' < "$tmpdepfile" >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add 'dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in 'foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mechanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +msvc7) + if test "$libtool" = yes; then + showIncludes=-Wc,-showIncludes + else + showIncludes=-showIncludes + fi + "$@" $showIncludes > "$tmpdepfile" + stat=$? + grep -v '^Note: including file: ' "$tmpdepfile" + if test "$stat" = 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The first sed program below extracts the file names and escapes + # backslashes for cygpath. The second sed program outputs the file + # name when reading, but also accumulates all include files in the + # hold buffer in order to output them again at the end. This only + # works with sed implementations that can handle large buffers. + sed < "$tmpdepfile" -n ' +/^Note: including file: *\(.*\)/ { + s//\1/ + s/\\/\\\\/g + p +}' | $cygpath_u | sort -u | sed -n ' +s/ /\\ /g +s/\(.*\)/'"$tab"'\1 \\/p +s/.\(.*\) \\/\1:/ +H +$ { + s/.*/'"$tab"'/ + G + p +}' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvc7msys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for ':' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. + "$@" $dashmflag | + sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' "$nl" < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no eat=no + for arg + do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + if test $eat = yes; then + eat=no + continue + fi + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix=`echo "$object" | sed 's/^.*\././'` + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + # makedepend may prepend the VPATH from the source file name to the object. + # No need to regex-escape $object, excess matching of '.' is harmless. + sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + IFS=" " + for arg + do + case "$arg" in + -o) + shift + ;; + $object) + shift + ;; + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" + echo "$tab" >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/install-sh b/install-sh new file mode 100755 index 0000000..a9244eb --- /dev/null +++ b/install-sh @@ -0,0 +1,527 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2011-01-19.21; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +no_target_directory= + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -t) dst_arg=$2 + # Protect names problematic for `test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; + + -T) no_target_directory=true;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + # Protect names problematic for `test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names problematic for `test' and other utilities. + case $src in + -* | [=\(\)!]) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + dst=$dst_arg + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/missing b/missing new file mode 100755 index 0000000..86a8fc3 --- /dev/null +++ b/missing @@ -0,0 +1,331 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2012-01-06.13; # UTC + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc. +# Originally by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case $1 in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + +esac + +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). This is about non-GNU programs, so use $1 not +# $program. +case $1 in + lex*|yacc*) + # Not GNU programs, they don't have --version. + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case $program in + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case $f in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te*) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison*|yacc*) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if test $# -ne 1; then + eval LASTARG=\${$#} + case $LASTARG in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if test ! -f y.tab.h; then + echo >y.tab.h + fi + if test ! -f y.tab.c; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex*|flex*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if test $# -ne 1; then + eval LASTARG=\${$#} + case $LASTARG in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if test ! -f lex.yy.c; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit $? + fi + ;; + + makeinfo*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -z "$file"; then + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 + touch $file + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: