diff --git a/src/PluginWBFZExchangePlugin/QtSARAntModelSetting.cpp b/src/PluginWBFZExchangePlugin/QtSARAntModelSetting.cpp
index 0945206..54767dd 100644
--- a/src/PluginWBFZExchangePlugin/QtSARAntModelSetting.cpp
+++ b/src/PluginWBFZExchangePlugin/QtSARAntModelSetting.cpp
@@ -111,10 +111,11 @@ Geometry::GeometrySet* antModelClass::get_antModelset()
 
 antModelClass antModelClassFactory()
 {
-	QString filepath = getOpenFilePath(
-		nullptr, QString::fromUtf8(u8"导入雷达模型"),
-		QString::fromUtf8(u8"STL Files (*.stl);;STL Files (*.stla);;step Files (*.stp);;step Files "
-						  u8"(*.step);;IGES Files (*.iges);;IGES Files (*.igs)"));
+	QString filepath="";
+//		filepath	= getOpenFilePath(
+//		nullptr, QString::fromUtf8(u8"导入雷达模型"),
+//		QString::fromUtf8(u8"STL Files (*.stl);;STL Files (*.stla);;step Files (*.stp);;step Files "
+//						  u8"(*.step);;IGES Files (*.iges);;IGES Files (*.igs)"));
 	antModelClass result(filepath);
 	return result;
 }
@@ -270,10 +271,11 @@ void QtSARAntModelSettingClass::setOCCTDocument(GUI::MainWindow* m)
 {
 	this->m				= m;
 
-	QString antFilePath = getOpenFilePath(
-		nullptr, QString::fromUtf8(u8"导入雷达模型"),
-		QString::fromUtf8(u8"STL Files (*.stl);;STL Files (*.stla);;step Files (*.stp);;step Files "
-						  u8"(*.step);;IGES Files (*.iges);;IGES Files (*.igs)"));
+	QString antFilePath ="";
+//	antFilePath=	getOpenFilePath(
+//		nullptr, QString::fromUtf8(u8"导入雷达模型"),
+//		QString::fromUtf8(u8"STL Files (*.stl);;STL Files (*.stla);;step Files (*.stp);;step Files "
+//						  u8"(*.step);;IGES Files (*.iges);;IGES Files (*.igs)"));
 
 	if(isExists(antFilePath)) {
 		this->antModel = new antModelClass(antFilePath);
@@ -427,7 +429,12 @@ void QtSARAntModelSettingClass::on_pushButton_OK_clicked()
 	this->saveFEKOImageSettingXML();
 
 
+
+
+
 	if(this->ui->checkBox_VT->isChecked()) {
+		this->CreateInitCfxScript(FEKOBase::POLAR_VT);
+
 		QProgressDialog progressDialog(u8"构建馈源设置脚本V", u8"终止", 0,
 									   this->FEKOAntPoselist.size());
 		progressDialog.setWindowTitle("imaging...");
@@ -438,6 +445,7 @@ void QtSARAntModelSettingClass::on_pushButton_OK_clicked()
 		progressDialog.setMinimum(0);
 		progressDialog.show();
 
+
 		QStringList lualist;
 		for(size_t start_prf_idx = 0; start_prf_idx < this->FEKOAntPoselist.size();) {
 			size_t end_prf_idx = start_prf_idx + 100;
@@ -477,6 +485,16 @@ void QtSARAntModelSettingClass::on_pushButton_OK_clicked()
 			lualist.append(
 				QString(u8" cadfeko 目标与场景模型.cfx --non-interactive --run-script    %1.lua")
 					.arg(cfxName));
+
+			QCoreApplication::processEvents(); // 允许事件处理，以便取消按钮响应
+
+			// 检查是否点击了取消按钮
+			if (progressDialog.wasCanceled()) {
+				qDebug() << "User canceled operation.";
+				break; // 退出任务循环
+			}
+
+
 		}
 		progressDialog.setWindowTitle(u8"馈源脚本生产成功");
 		progressDialog.setValue(this->FEKOAntPoselist.size());
@@ -510,6 +528,7 @@ void QtSARAntModelSettingClass::on_pushButton_OK_clicked()
 		}
 	}
 	if(this->ui->checkBox_HT->isChecked()){
+		this->CreateInitCfxScript(FEKOBase::POLAR_HT);
 		QProgressDialog progressDialog(u8"构建馈源设置脚本H", u8"终止", 0,
 									   this->FEKOAntPoselist.size());
 		progressDialog.setWindowTitle("imaging...");
@@ -754,3 +773,50 @@ void QtSARAntModelSettingClass::on_polarMode_change(int state) {
 	qDebug()<<this->ui->checkBox_VT->isChecked();
 	qDebug()<<this->ui->checkBox_HT->isChecked();
 }
+void QtSARAntModelSettingClass::CreateInitCfxScript(FEKOBase::TRANSLATIONPOLARTYPE polartype) {
+	size_t start_prf_idx=0;
+	size_t end_prf_idx = 1;
+	if(end_prf_idx > this->FEKOAntPoselist.size()) {
+		end_prf_idx = this->FEKOAntPoselist.size();
+	} else {
+	}
+	QString cfxName ="";
+	QString luatext="";
+	if(polartype==FEKOBase::TRANSLATIONPOLARTYPE::POLAR_VT) {
+		cfxName = QString("%1_%2_POLAR_VT_PRF_ant_init_script")
+					  .arg(this->simulationparams->taskName)
+					  .arg(FEKOBase::FEKOImageModeenumToString(this->simulationparams->imagemode))
+					  .arg(QString::number(start_prf_idx))
+					  .arg(QString::number(end_prf_idx - 1));
+		luatext =this->createLuaSciptString(start_prf_idx, end_prf_idx, cfxName, FEKOBase::POLAR_VT);
+	}else if(polartype==FEKOBase::TRANSLATIONPOLARTYPE::POLAR_HT){
+		cfxName = QString("%1_%2_POLAR_HT_PRF_ant_init_script")
+					  .arg(this->simulationparams->taskName)
+					  .arg(FEKOBase::FEKOImageModeenumToString(this->simulationparams->imagemode))
+					  .arg(QString::number(start_prf_idx))
+					  .arg(QString::number(end_prf_idx - 1));
+		luatext=this->createLuaSciptString(start_prf_idx, end_prf_idx, cfxName, FEKOBase::POLAR_HT);
+	}else{
+		return;
+	}
+	// 写入文件
+	QString filePath =
+		this->workSpace + QDir::separator() + QString(u8"%1.lua").arg(cfxName);
+	// 创建文件对象
+	QFile file(filePath);
+
+	// 打开文件以供写入，如果文件不存在将创建新文件
+	if(file.open(QIODevice::WriteOnly | QIODevice::Text)) {
+		// 创建文本流，并设置编码为UTF-8
+		QTextStream stream(&file);
+		stream.setCodec("UTF-8");
+		stream << luatext;
+		// 关闭文件
+		file.close();
+		qDebug() << "File written successfully. " + filePath;
+	} else {
+		qDebug() << "Could not open file for writing.";
+		QMessageBox::information(nullptr, QString::fromUtf8(u8"提示"),
+								 QString::fromUtf8(u8"文件写入失败"));
+	}
+}
diff --git a/src/PluginWBFZExchangePlugin/QtSARAntModelSetting.h b/src/PluginWBFZExchangePlugin/QtSARAntModelSetting.h
index 871ca9c..014bbfc 100644
--- a/src/PluginWBFZExchangePlugin/QtSARAntModelSetting.h
+++ b/src/PluginWBFZExchangePlugin/QtSARAntModelSetting.h
@@ -101,8 +101,9 @@ public:
 
 	void refreshFEKOSimulationParams();
 
+	void CreateInitCfxScript(FEKOBase::TRANSLATIONPOLARTYPE polartype);
+
 signals:
-	
 
 
 public slots:
@@ -123,8 +124,6 @@ public slots:
 	void on_lineEdit_refRange_editingFinished();
 
 	void on_polarMode_change(int state);
-
-
 	void SelectFFESourcePath(size_t thetaPoints, size_t phiPoints, QString ffePath);
 	void SelectFFESourcePathH(size_t thetaPoints, size_t phiPoints, QString ffePath);
 public slots: